|
| |
Loading Arm with Vapor Return Pipe |
 |
This is the basic loading arm with vapor return. It incorporates a liquid compatible hose to carry vapors back to the outlet flange. It can often be used to load some volatile and noxious products.Vapors are collected via a sealing hood which can be externally lining in Viton or EPDM to improve sealing qualities. The balance system incorporates a pneumatic control cylinder to ensure the sealing hood pressing onto the manhole as a precondition before loading. |
| |
| Loading Arm for Oil Barrel |
 |
This style loading arm is specially designed for loading barrel on the truck, the-re is a oil gun at the end of the arm, the operator holds the oil gun to load the barrel. It has two models: DN50 and DN40 .
|
| |
| Jacket Pipeline Loading Arm |
 |
This is a new product in our company, and its structure is special. Both the swivel joints and pipelines are jacket structure. The return vapor can pass through the jacket to the outlet flange, the advantage of which is that the operation is easier than the loading arm with return vapor pipe. It can be operated as a single pipeline loading arm as well. |
| |
| Pneumatic Control Submerging Pump Unloading Arm |
 |
This style of unloading arm can often be used to unload gasoline, diesel oil and some light oil. It can avoid the product pressure in the pipeline lower than the critical gas saturated when the environment temperature is high in hot area. It is a pneumatic control system, so 0.4-0.6Mpa air supply is required at the site. |
| |
| Hydraulic Control Submerging Pump Unloading Arm |
 |
The efficiency of the hydraulically powered unloading arm is higher than the pneumatically powered, but it requires an electric power supply at site, and the hydraulic station can be put on or bellow the platform. The pump lift is 6m and 4m |
| |
| Aluminum Alloy Loading Arm |
 |
All the material of the arm is aluminum alloy or pure aluminum. The total weight is less than 20 kg, and the operator can take the arm away after loading. It is often used for military purposes. |
| |
Bottom Loading Arm |
 |
Utilize a common base riser, the bottom loading arm has a liquid and vapor return line for side or rear connections to the tank truck. It is often used for the LPG or Ammonia products. It can be fitted with quick release coupler which will enhance safety and environmental protection as well. |
| |
|
